Rebar Drawing Equipment W-8

W-8 Rebar Drawing Machine

Rebar Spool Dimensions: Max. spool weight: 2000 kg
Dimensions: 4500 x 2000 x 1500 mm

W-8 Rebar Drawing Machine
Inlet diameter: 6.5 mm
Outlet diameter: 2.20 mm

Speed: Design speed: 10 m/sec
Machine speed: 8 m/sec (max)
Feed speed: 1 m/sec
Number of blocks: 8 blocks
Block diameter: 600 mm

Each synchronization block with a hand sensor.
Die holder: 200 x 160 x 300 mm
Hand sensor: Analog sensors
Length measuring part: Encoder shaft for measuring machine length and speed.
Cooling: Dies: Water
Blocks: Water
Water: Consumption: Approx. 15 m³/h
Pressure: 2-3 bar
Temperature: 20÷30°C
Water inlet: Left side
Water outlet: Right side

Control system: Siemens PLC
Data input: High-quality touch panel.

Distribution cabinet: High-protection sheet steel construction. The distribution cabinet is designed with an air-cooled system.
Power supply: Operating: 3 x 380 V AC, 50 Hz
Control: 24 V DC
Machine power: Block motors: 22 kW
Die holder motors: 0.75 kW
Total power: 200 kW

Rolling cassettes
Rolling cassettes are used to produce ribbed wire. Dimensions: 600x400x500 mm
Rebar diameter: 3.00 - 4.00 mm
Cooling: Water
Rebar range: 2.20 ÷ 5.00 mm
Speed: 10 m/sec, synchronized with the drawing line
Drive motors: AC motors with gearbox
Brake: Disc brake
Power supply: Operating: 3x380 VAC
Control: 24 VDC

Specifications:
Total power, kW 200
Unit power, kW 22
Rebar input diameter, mm 6.5
Rebar output diameter, mm 2.2
Rebar drawing speed, m/sec 8 m/sec
Die and drum cooling: Water
Capacity: 8 moving cassettes
Machine dimensions: mm 1500x11000
Weight: 13000 kg

Operating modes:
1. Automatic
2. Manual

Rebar winder length: 1600x1200
Rebar winder power: 15 kW
Operating space: 3000x25000 mm
Control: Siemens PLC
Siemens display
Frequency controller: Control Techniques
Motors: Strojna
Sensor: Turck

12-month warranty